Elyria Spring & Stamping
You need it? We can make it.
     
home
news & events
about us
contact info
     
 

ISO 9001:2008 | Conflict Minerals Policy

 
   
Metal Stampings
Spring Washers
Springs
Compression Springs
Extension Springs
Torsion Springs
Wire Forms
 
Spring Washers

We manufacture with materials ranging from .003” to .500” in diameter...and more!

 

 

Wave Washers

Wave washers (or wave springs) are wavy metal washers designed to provide a compensating spring force and sustain a load or absorb shock. Wave washers are commonly called spring washers. Wave washers are disks of metal that are formed in an irregular shape. When the washer is loaded it deflects, acts like a spring, and provides a preload between two surfaces.

Important dimensions to consider when specifying the size of wave washers are:

  • Inside & Outside Diameter: The inside and outside diameter are the most important dimensions.

  • Thickness or Working Height: The thickness or working height refers to either the thickness of the washer material, or the working height (installed height) for the product.

  • Rated or Working Load: The rated or working load is the maximum or optimal working load for the product. Wave washers are often rated at 50% compression.

Send us your wave spring designs today and you’ll see why our customers keep coming back!

We can accommodate long or short runs and we’ll maintain your tooling at no additional cost to you.
 

 

 
Get a quote on custom stamped washers today from Elyria Spring & Stamping
 
 

© 2009 Elyria Spring & Specialty, Inc. • 123 Elbe St. • Elyria, OH 44035 • 800-390-2493 • FAX 440-322-4390 • E-Mail Us

home  |  about us  |  products  |  capabilities  |  quality control  |  industries served  |  quote request
resource center  |  news & events  |  contact info  |  site map